Showing posts with label TUTORIAL. Show all posts
Showing posts with label TUTORIAL. Show all posts

Sunday, September 22, 2019

How to Overcome Error Signal on Android Oppo Mobile Phones

How to Overcome Error Signal on Android Oppo Mobile Phones

 How do I overcome the cellphone's signal on the Oppo smartphone? How to deal with an android phone with no signal is a solution that is often sought when there is no network service. The problem of the Android OPPO cellphone signal error is quite diverse, starting from the incoming cellphone signal which disappears, the internet network does not appear and the signal is only 2g continuously. Because of that we have to immediately fix the cellphone signal that often disappears appearing on the oppo cellphone considering the importance of communication through the telephone network and the internet today.


 No wonder if many Android smartphone users, especially Oppo Android phones, get dizzy if the problem of an Android phone signal that has an error struck them. Sometimes we think the internet network or network operator that does not appear because the sim card is not readable on the android mobile that we have. After searching and trying to fix a cellphone signal that is often lost on existing Oppo Android phones, the results we can afford are still the same. The smartphone's oppo signal becomes totally lost when previously only the internet network did not appear or the sim card signal was lost.

 Because of that, on this occasion we will try to make tips for dealing with the problem of a weak or completely lost android cellphone, a cross appears. With dreams after trying internet network tips that don't appear, the problem resembles an unreadable sim card, but the signal and network don't appear so that the oppo cellphone we have is unable to call or text. Therefore if one of the sim cards is not detected but the other sim card is read, let's follow the steps from us on how to overcome the complete hp oppo signal error below.
In this experiment the oppo smartphone that we use is the a37 type oppo smartphone. But before we discuss further about the hp oppo a37 signal is lost, it would be better if we know some of the factors causing the HP signal to disappear suddenly. Below are some of the causes of cell phone android error signals that do not appear or are often lost, including:

1. Signal unavailability
Weak signal on the android phone can be caused by one of them because there is no signal tower at all. Capricorn makes perfect sense if the HP signal suddenly disappears frequently, for that we need to make sure there is or not the area you are building has a signal tower.

2. Error on an android smartphone
Android phones that have even been dropped too often can also be the cause of the absence of a signal on the smartphone. That is because the brass signal catcher is enlarged so that the signal capture power is drastically reduced from the end of the vibration when it falls.

3. Weather Factors
The strength or weakness of the HP Oppo signal that we have also depends on the weather factor. The signal capture on the hp oppo a 37 is not good usually the weather is heavy rain accompanied by strong winds and lightning.

4. Interference From Network Operator Services

A network that is up and down aka inconsistent can trigger lost signals arise on Android smartphones. This could be due to the network operator services that we use are being interrupted, other than that other problems in their activities so that the impact on the uneven distribution of signals.

5. Changes to Network Settings

Often we change the network settings on our Android smartphone in 4G or 3G only mode. However, by implementing these changes it would create a cellphone signal oppo a37 does not appear. This can be due to the region we are in when it does not support the existence of 4g / 3g signals so that Android phones are not able to search for ordinary networks. For that we are able to carry out changes to the android network by entering into the offerings >> Cellular Network >> Select Network Mode "WSDMA / GSM (automatic connection").

6. Software Damage

If before we carry out a software update the signal condition on the smartphone oppo we have is fine, but after the update, it creates a signal that does not appear, the biggest possibility that creates an android phone is missing the signal, which is a bug in some software. Therefore, to restore the lost 3g signal and 4g network that is by carrying out the Android smartphone software downgrade.


7. Hardware Damage

When we have tried to carry out repairs to overcome the hp oppo a37 signal which is often lost through smartphone software but has not produced results, it is possible that if the internet does not appear capable of due to damage to the hardware. Examples of cases if our android mobile phone ever entered the water even though the android cellphone is not waterproof then if after that incident it creates an Android signal that a cross can be damaged so that our Android smartphone is damaged in its signal capture device.

8. Signal Repair From Operator Services
Operators may be carrying out improvements to their system or tower because there is a problem or adding new features. To improve or add the brand new features, for the sake of safety, electricity will be temporarily turned off in the system or tower so that the impact on cell phone signals that are unstable or disappear.

9. Problems with Third Party Applications

The signal can be influenced by third-party applications that you have installed. These applications may limit signal strength because some features of third-party applications do not match your device.
After knowing some of the factors that create the hp oppo a37 there is no signal above, we will give the following steps to overcome the error of an android cellphone signal so as to create a cellphone with no signal or an android cellphone unable to access the internet. Although the cellphone that we used in the tutorial is missing the signal this time, the Oppo A37 doesn't hurt if we try on other types of smartphone, let's just take a look at the following reviews:

Make sure the sim card is in good condition, starting from the installation of a sim card that is not reversed until the condition is still active, not past the grace period.
Check whether the android oppo phone that we have is in Flight Mode or not? If it is still active then deactivate it and wait a while for the system to refresh the existing network.
Make sure the sim card settings are already active if in the OPPO type using a Dual SIM slot. Sometimes the signal on sim one is there but on sim two a cross appears only because the settings in sim 2 slot are not active yet.
Make sure the condition of the SIM card slot on the android oppo phone in normal conditions, avoid the connector being bent or something closed so as to create a sim card signal not detected on the hp oppo.
Perform an error recovery system by resetting Android settings to factory settings.
If the above steps have not been able to fix the error hp oppo signal and there is no change then it doesn't hurt if you try to investigate the IMEI of the oppo phone. Sometimes the signal does not appear because the SimCard OPPO is unable to be detected by the system because it is caused by a lost or problematic IMEI.
If all the steps above have been carried out and even have carried out the flashing firmware process it also does not produce results in detecting cellular cards on the HP OPPO that we have, then there are problems related to Hardware that must be checked at the nearest OPPO service center in the area we live.


NOTE:

 To check IMEI on the OPPO cell the same as other android phones by typing * # 06 #. But if IMEI does not appear, here's how to restore the missing IMEI OPPO smartphone number:
Enter EngineerMode by pressing the dial button * # * # 3646633 # * # *
After that we enter the EngineerMode dish, on the Menu tab select "Select CDS Information" then select "Radio Information".
To fix SIMEI SIM1 select "Phone1" and type the alphabet A and select AT + EGMR = 1.7, "CONTENT IMEI SIM1 HERE". Then click "SEND AT COMMAND" and make sure there is a notification "AT command is sent".
To fix SIMEI SIM2 select "Phone2" and type the alphabet A and select AT + EGMR = 1.10, "CONTENT IMEI SIM2 HERE". Then click "SEND AT COMMAND" and make sure there is a notification "AT command is sent".
The next step is restarting the hp oppo we have (turn it off then on again).
Check IMEI by dial * # 06 # *. If we succeed, the IMEI Oppo a37 has returned and of course it is capable of being used normally because the signal does not disappear anymore.

Thus our article this time is the only brand that we discuss about the problem of how to overcome the Android phone signal that often disappears suddenly. Hopefully the steps - steps above are able to restore the 4g network that does not appear on the smartphone oppo, that's all and thank you ...

Thursday, September 19, 2019

Flashing Oppo Realme RMX 1821 100% Work

Flashing Oppo Realme RMX 1821 100% Work

Oppo Realme 3 RMX 1821 Firmware ROM (streak record) on your PC. The Firmware arrives in a compress bundle, which contains Glimmer Record, Streak Apparatus, USB Driver and How-to Streak Manual.

Record Name:

Oppo Realme 3 RMX 1821"Realme+3+RMX1821+EX+11+A.13+190319"zip

Record Size: 5.00 GB

Android: 9

IOS Rendition: 6

Step by step instructions to Streak

Stage 1: Download and after that concentrate the Oppo Realme 3 RMX 1821 Stock Firmware.

Stage 2: In the wake of removing the bundle, you will have the option to get the Firmware Record, Streak Instrument and Driver.

Stage 3: Introduce the gave USB Driver on your PC.

Stage 4: Pursue the How to Streak Manual to Streak the Firmware on your Oppo Realme 3 RMX 1821 Gadget.

Note

If it's not too much trouble From the start Reinforcement Your Cell Phone Firmware:

On the off chance that you are going to streak the above Firmware on your cell phone gadget, at that point take a reinforcement of everything as in light of the fact that your own information will be erased in the wake of blazing the stock rom or firmware.

The firmware shared on this page is formally discharged by the organization and encourages you to recoup your gadget on the off chance that you at any point got boot-circle, programming mistake, update blunder, hanging and dead issue.

Wednesday, September 12, 2018

How to Flash the Samsung Galaxy M20 SM-M205G

How to Flash the Samsung Galaxy M20 SM-M205G

In this article, I will share a tutorial about flashing the latest cellphone, an article about How to Flash the Samsung Galaxy M20 SM-M205G.

https://adcash.myadcash.com/register?prmid=TSIPB2JTPY
M20


Not long ago Samsung launched its newest series, the M series, and began with the release of the Samsung Galaxy M20 to Indonesia.

This in my opinion personally becomes one of Samsung's steps to target the lower middle market.
 In fact, many say that Samsung is willing to lower the throne to continue to be able to continue to compete with other cellphone manufacturers who are getting more and more crazy here.

But of course we will not discuss much about it, because this article will only have a Samsung M20 flash guide.

How to Flash Samsung M20
Here I have provided complete flashing materials including the Samsung M20 firmware
 Samsung M20 Flashing Material:

    1. amsung drivers
    2. Odin v3.11.1
    3. Firmware of Samsung Galaxy M20 SM-M205G

Firmware Information:

    Product code: XXV / XEV
    Size: 2.5 GB
    Security Patch Level: U1
    Android: 8.1 Oreo
    Model: SM-M205G
    Model Name: Samsung Galaxy M20



Flashing Tutorial:


Please download all the ingredients above and make sure the M20 battery is above 60% for mutual safety.
    Then extract the file material for flashing Galaxy M20 SM-M205G.
    Turn off your smartphone.
    Enter the download mode by pressing, and holding the Volume Up + Volume Down button simultaneously, then while still holding the two USB plug buttons connected to a PC or laptop. Then the cell phone will automatically enter the Samsung M20 download mode.
    When a notification appears to enter "Download Mode". Press the volume up / up button and select Continue.
    Turn on Odin Agan. Connect the Galaxy M20 SM-M205G with a data cable to your PC.
    Pay attention to the buttons on the name (BL / AP / CP / CSC).
    You can retrieve files according to the names in the fields. Do as in the example image below.




    If it's all, click Start, wait for the flashing process to finish.
    If the "PASS" sign comes out in the COM column, then Flashing is successful. Automatically Galaxy M20 SM-M205G will restart.
    Done.